Automatic weighing batcher for cement dosing with single screw screw feeder
Operational help and consultation
Full cycle of warranty service
The dispenser is designed for dosing cement with prescribed doses with specific gravity up to 1350 kg / m3. The principle of the dispenser is based on the transformation of the values of the weight of the material being weighed in the load receptor, using strain gauges into an electrical signal proportional to the weight of the load.
The electrical signal from the load cells is fed into the dosing controller, which, by changing it into a digital code, and after the conversion, the results of the weighing are fed to the master controller. The feeder drive is equipped with a two-speed motor, which allows dosing in two modes: "GRUBO" and "EXACTLY". The cement is delivered to the load receptor of the dispenser by one or two screw feeders.
|The greatest limit of dosing (GLD), kg||400||600||400||600|
|The lowest dosing limit (LDL), kg||120||120||120||120|
|Dosing time, no more than, in||45|
|Discreteness of counting, kg||0,20|
|Accuracy class according to GOST 10223-97||1|
|Control of flaps||Electro-pneumatic|
|Installed power, kW||3,4||3,4||6,8||6,8|
|Working pressure of compressed air, MPa||0,4-0,6|
|Overall dimensions (LxCxH), not more than, mm||2800х1310х2700||2800х1310х2900||2800х1310х2700||2800х1310х2900|
|Weight, no more than, kg||1300||1340||1300||1340|