Automatic weighing batcher for liquid dosing
Operational help and consultation
Full cycle of warranty service
The dispenser is designed for dosing with prescribed portions of water or liquid additives with a specific gravity of 1000 kg / m³. The principle of the dispenser is based on the transformation of the values of the weight of the material being weighed in the load receptor, using strain gauges into an electrical signal proportional to the weight of the load.
The electrical signal from the load cells is fed into the dosing controller, which, by changing it into a digital code, and after the conversion, the results of the weighing are fed to the master controller. The liquid is fed to the load receptor of the dispenser by one or two feeders.
1 - frame; 2 - load receptacle; 3 - feeder; 4 - strain gage sensor; 5 - suspension; 6 - drain hopper; 7 - pneumatic system.
|The greatest limit of dosing (GLD), kg||200||600||400||600|
|The lowest dosing limit (LDL), kg||60||120||120||120|
|Dosing time, no more than, in||45|
|Discreteness of counting, kg||0,10||0,20||0,10||0,20|
|Accuracy class according to GOST 10223-97||1|
|Control of flaps||Electro-pneumatic|
|Installed power, kW||0,3||0,3||0,3||0,3|
|Working pressure of compressed air, MPa||0,4-0,6|
|Overall dimensions (LxCxH), not more than, mm||1260х1100х1660||1260х1100х2290||1260х1100х1660||1260х1100х2290|
|Weight, no more than, kg||420||470||420||470|