Automatic weighing batcher for dosing liquid chemical additives
Operational help and consultation
Full cycle of warranty service
The dispenser is designed for dosing chemical additives with a concentration of 0.5 to 50% and specific gravity up to 1000 kg / m³. The principle of the dispenser is based on the transformation of the values of the weight of the material being weighed in the load receptor, using strain gauges into an electrical signal proportional to the weight of the load.
The electrical signal from the load cells is fed into the dosing controller, which, by changing it into a digital code, and after the conversion, the results of the weighing are fed to the master controller. The dispenser is made of acid-resistant materials and is designed to work in an aggressive environment. The feeding device of the dispenser is fed by one or two feeders. It is possible to install a water dispenser on the frame.
1 - frame; 2 - load receptacle; 3 - feeder; 4 - air distributor; 5 - funnel; 6 - strain gauge sensor; 7 - Saddle valve; 8 - ball cock.
|The greatest limit of dosing (GLD), kg||30||50||30||50|
|The lowest dosing limit (LDL), kg||4,0||8,0||4,0||8,0|
|Dosing time, no more than, in||45|
|Discreteness of counting, kg||0,01||0,02||0,01||0,02|
|Accuracy class according to GOST 10223-97||1|
|Control of flaps||Electro-pneumatic|
|Installed power, kW||0,3||0,3||0,3||0,3|
|Working pressure of compressed air, MPa||0,4-0,6|
|Overall dimensions (LxCxH), not more than, mm||960х810х1250||1025х810х1330||1220х810х1250||1350х810х1330|
|Weight, no more than, kg||120||130||120||130|